A Small Diameter Pipe Clamp Solution
QFIII - SP HYBRID
Hybrid Pipe Fitting Fast & Simple
A single pipe fitting tool solution developed to do the complete job and take the place of a multitude of different tools, sizes and other gear. Whether the job is pipe to pipe, pipe to fittings or just about any other need, the QFIII was developed to allow for a single user to do it fast and with ease.
** Hybrid **
The QFIII-SP Hybrid is not a traditional pipe fitting clamp, but the consolidation of a variety of different types and sizes of traditional tools and other common gear.
Hybrid Attachments are quickly and easily installed, drastically enhancing its versatility and provide the ability to do the complete job with the same tool. No need for different tools and sizes.
Feed Rate:
0.3 – 2.5 inch/minute (7.62 – 63.5 mm/minute)
Maximum Cutting Depth:
6, 7, 10, 12, or 18 in. (154.4, 177.8, 254, 304.8, or 457.2 mm)
Spindle Size:
Morse taper #4 & #5, #40 NMTB adapters available
Drill Size:
Up to 3.25 in. (82.6 mm) diameter
Power Input:
Hydraulic 10 HP
Feed Rate:
0.3 – 2.5 inch/minute (7.62 – 63.5 mm/minute)
Maximum Cutting Depth:
6, 7, 10, 12, or 18 in. (154.4, 177.8, 254, 304.8, or 457.2 mm)
Spindle Size:
Morse taper #4 & #5, #40 NMTB adapters available
Drill Size:
Up to 3.25 in. (82.6 mm) diameter
Power Input:
Hydraulic 10 HP
Feed Rate:
0.3 – 2.5 inch/minute (7.62 – 63.5 mm/minute)
Maximum Cutting Depth:
6, 7, 10, 12, or 18 in. (154.4, 177.8, 254, 304.8, or 457.2 mm)
Spindle Size:
Morse taper #4 & #5, #40 NMTB adapters available
Drill Size:
Up to 3.25 in. (82.6 mm) diameter
Power Input:
Hydraulic 10 HP
compact Drill
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Interdum sapien, platea leo id pulvinar pharetra elementum. Risus, sapien orci, tincidunt posuere faucibus. Neque, amet rhoncus etiam cursus tempor. Sit quam egestas quam mattis mattis condimentum leo commodo velit. Sollicitudin suspendisse quam tortor purus lectus. Amet, amet pulvinar amet ultrices volutpat. Amet auctor lorem maecenas tellus convallis augue velit, ante adipiscing. Et, velit donec velit aliquet. Quis quam ornare lectus leo cras eu, integer orci.
Feed Rate:
0.3 – 2.5 inch/minute (7.62 – 63.5 mm/minute)
Maximum Cutting Depth:
6, 7, 10, 12, or 18 in. (154.4, 177.8, 254, 304.8, or 457.2 mm)
Spindle Size:
Morse taper #4 & #5, #40 NMTB adapters available
Drill Size:
Up to 3.25 in. (82.6 mm) diameter
Power Input:
Hydraulic 10 HP
Feed Rate:
0.3 – 2.5 inch/minute (7.62 – 63.5 mm/minute)
Maximum Cutting Depth:
6, 7, 10, 12, or 18 in. (154.4, 177.8, 254, 304.8, or 457.2 mm)
Spindle Size:
Morse taper #4 & #5, #40 NMTB adapters available
Drill Size:
Up to 3.25 in. (82.6 mm) diameter
Power Input:
Hydraulic 10 HP
Feed Rate:
0.3 – 2.5 inch/minute (7.62 – 63.5 mm/minute)
Maximum Cutting Depth:
6, 7, 10, 12, or 18 in. (154.4, 177.8, 254, 304.8, or 457.2 mm)
Spindle Size:
Morse taper #4 & #5, #40 NMTB adapters available
Drill Size:
Up to 3.25 in. (82.6 mm) diameter
Power Input:
Hydraulic 10 HP
Feed Rate:
0.3 – 2.5 inch/minute (7.62 – 63.5 mm/minute)
Maximum Cutting Depth:
6, 7, 10, 12, or 18 in. (154.4, 177.8, 254, 304.8, or 457.2 mm)
Spindle Size:
Morse taper #4 & #5, #40 NMTB adapters available
Drill Size:
Up to 3.25 in. (82.6 mm) diameter
Power Input:
Hydraulic 10 HP
Connect With Us
Please don’t hesitate to reach out with any automation needs. We look forward to hearing from you.